Motorola PR1500 Accessories

8505518V01

8 inch Wideband Antenna, 136-174 MHz

Wideband antennas are ideal when the radio is used in different frequencies since one antenna will cover all ranges.

8505644V02

7 inch Helical Antenna, 151-162 MHz

Helical antennas are sturdy and dependable. Each antenna is designed and built to quality standards. The skirt at the base of the connector helps to seal out damaging elements.The connector is made of plated brass material for long life.

NAE6546

3.5 inch Helical Antenna, 403-435 MHz

Helical antennas are sturdy and dependable. Each antenna is designed and built to quality standards. The skirt at the base of the connector helps to seal out damaging elements.The connector is made of plated brass material for long life.

NAE6548

3 inch Helical Antenna, 470-520 MHz

Helical antennas are sturdy and dependable. Each antenna is designed and built to quality standards. The skirt at the base of the connector helps to seal out damaging elements.The connector is made of plated brass material for long life.

NTN9815

NiCd, 1525 mAh Battery

Premium NiCD battery for XTS 2500, XTS 1500, MT 1500 and PR1500 portables. NiCD is best suited for extreme temperature operation.

NNTN6263

NiMH, 2000 mAh. Intrinsically Safe, Ruggedized Battery

NNTN7554

IMPRES™, Li-ion, Std IP67 Battery

NTN9858

NiMH, 2100 mAh Battery

Motorola NTN9858C IMPRES NiMH, 2100 mAh, 7.5V Battery

IMPRES batteries when used with an IMPRES charger provide automatic, adaptive reconditioning, end-of-life display, and other advanced features. Data is stored in the battery and communicated to the charger via a unique IMPRES communication protocol which is designed to maximize talk-time and optimize battery cycle life, all automatically.

HLN6853

2.25 inch Spring Action Belt Clip

NNTN4115

Leather Case with High-Activity Swivel Features 3 inch swivel belt loop, D-rings and T-strap.

Leather Case with High-Activity Swivel Features 3 inch swivel belt loop, D-rings and T-strap.

Motorola carry cases were developed to meet the demands of public safety and other users who operate in the most rigorous of environments.

A variety of carrying accessories are available for comfort and convenience. The carrying cases are available in sizes designed to fit radios with a battery and permit audio to be heard clearly. Leather cases are constructed of top grain, 8 ounce leather and all stainless steel hardware.

High-activity cases have a swivel D-ring button and belt loop. To remove case from belt loop, rotate case 180 degrees and slide case upward, out of the holder. Case stays on belt more securely in high-activity applications while allowing the radio to swing freely with body movements.

NNTN4117

Leather Case with Belt Loop Features 3 inch belt loop, D-rings and T-strap.

Motorola carry cases were developed to meet the demands of public safety and other users who operate in the most rigorous of environments.

A variety of carrying accessories are available for comfort and convenience. The carrying cases are available in sizes designed to fit radios with a battery and permit audio to be heard clearly. Leather cases are constructed of top grain, 8 ounce leather and all stainless steel hardware.

High-activity cases have a swivel D-ring button and belt loop. To remove case from belt loop, rotate case 180 degrees and slide case upward, out of the holder. Case stays on belt more securely in high-activity applications while allowing the radio to swing freely with body movements.

NLN7967

Wall Mount for Multi-Unit Charger

This is a wall mount for IMPRES™ multi-unit charges. IMPRES battery chargers ensure maximum talk time and optimized battery cycle life through the use of its advanced charging algorithm and automatic reconditioning features

NTN1667

110V Single Unit Universal Tri-Chemistry Charger

RLN5382

Charger Display Module for IMPRES Multi-Unit Charger with Software

This module is compatible with the standard IMPRES Multi-Unit Charger WPLN4108BR, WPLN4109BR and WPLN4110BR. Up to 6 modules can be used per charger, one for each charging pocket. Includes detailed installation instructions.

NNTN7676

Fleet Management Multi‐Unit Charger Interface (Note: This device does not charge batteries)

WPLN4108

IMPRES, Multi-Unit Charger

WPLN4130

IMPRES Multi-Unit Charger with Display Modules

Charger Display Modules provide powerful, "real time" analyzing information for IMPRES batteries, including current charge status, battery mAh, percent rated capacity and battery voltage. Readout displays battery kit number, serial number and chemistry and the time remaining to complete the charge for NiCd and NiMH batteries.

AARLN4885

Receive-Only Covered Earbud with coiled cord

This earpiece is compatible with all Remote Speaker Microphones with a 3.5 mm audio jack on the head of the microphone.

BDN6665

Extra Loud Receive-Only Earpiece with Standard Earphone (1-Wire), Beige

(exceeds OSHA limits)

Surveillance accessories allow the user to receive messages privately through the earpiece – ideal when discreet communication is required. The following surveillance accessories require the 3.5mm threaded adapter jack BDN6676D that attaches to the radio, unless being used with XTS 3000/3500/5000 UHF Public Safety Microphones

BDN6667

Earpiece with Microphone and Push-to-Talk Combined (2-Wire), Beige

BDN6729

Extra Loud Earpiece with Microphone and Push-to-Talk Combined (2-Wire), Beige

(exceeds OSHA limits)

Surveillance accessories allow the user to receive messages privately through the earpiece – ideal when discreet communication is required. The following surveillance accessories require the 3.5mm threaded adapter jack BDN6676D that attaches to the radio, unless being used with XTS 3000/3500/5000 UHF Public Safety Microphones

BDN6726

Receive-Only Earpiece with Standard Earphone (1-Wire), Black

BDN6728

Receive-Only Earpiece with Volume Control and Earloop (1-Wire), Black

BDN6730

Earpiece with Microphone and Push-to-Talk Separate (3-Wire), Black

BDN6732

Extra Loud Earpiece with Microphone and Push-to-Talk Separate (3-Wire), Black

(exceeds OSHA limits)

Surveillance accessories allow the user to receive messages privately through the earpiece – ideal when discreet communication is required. The following surveillance accessories require the 3.5mm threaded adapter jack BDN6676D that attaches to the radio, unless being used with XTS 3000/3500/5000 UHF Public Safety Microphones

BDN6781

Earbud, receive-only

Requires adapter BDN6676D.

Pellet-style earpieces allow users to receive communication discreetly and are comfortable for extended-wear use.

NNTN8295

Operations Critical Wireless Earbud with 45.7” cable, inline mic, BLACK. Optimized to work with the Intelligent Audio feature. Must be ordered with NNTN8127 wireless PTT Pod

PMLN4556

Earbud In-Line PTT/MIC/VOX SW (MAGONE)

PMLN4620

Receive-Only D-Shell Earpiece

This earpiece is compatible with all Remote Speaker Microphones with a 3.5 mm audio jack on the head of the microphone.

RLN6230

Extreme Noise Kit.

Includes 2 foam earplugs. For high-noise environments. Noise reduction = 24dB. Can be used with Clear Comfortable Earpieces, Black

Extreme Noise Kits provide extra comfort and/or noise protection for users wearing surveillance accessories.

Lightweight, translucent tube attaches to Motorola surveillance accessories to provide flexibility and comfort, which now includes a new quick disconnect adapter. The Quick Disconnect Adapter allows users, especially those in multiple shift operations, to easily remove or alternate acoustic tubes. Clothing clip prevents accessory from being pulled from the ear due to body movement or head rotation. For optimal performance, Extra Loud Earphones are recommended.

RLN6232

Low Noise Kit - Clear Acoustic Tube Assembly.

Includes 1 clear rubber eartip. For low-noise environments, does not provide hearing protection, Black

Extreme Noise Kits provide extra comfort and/or noise protection for users wearing surveillance accessories.

Lightweight, translucent tube attaches to Motorola surveillance accessories to provide flexibility and comfort, which now includes a new quick disconnect adapter. The Quick Disconnect Adapter allows users, especially those in multiple shift operations, to easily remove or alternate acoustic tubes. Clothing clip prevents accessory from being pulled from the ear due to body movement or head rotation. For optimal performance, Extra Loud Earphones are recommended.

RLN6242

Quick Disconnect Acoustic Tube Replacement

BDN6635

Voice-Activated (VOX) Headset with Boom Microphone. Noise reduction rating = 24dB.

Heavy-duty headsets include noise-Canceling boom microphones and can be worn with or without a hardhat. The Push-to-Talk switch is located on the earcup. On voice-activated models, the VOX module is contained within the headset.

Headsets are for use in noise levels up to 125dB.

Heavy-duty headsets require radio adapter cable BDN6673B, sold separately.

BDN6636

Voice-Activated (VOX) Headset with Throat Microphone. Noise reduction rating = 24dB.

Heavy-duty headsets include noise-Canceling boom microphones and can be worn with or without a hardhat. The Push-to-Talk switch is located on the earcup. On voice-activated models, the VOX module is contained within the headset.

Headsets are for use in noise levels up to 125dB.

Heavy-duty headsets require radio adapter cable BDN6673B, sold separately.

NMN6245

Single-Muff Lightweight Headset with In-Line PTT Switch

Lightweight headsets provide high-clarity, hands-free, discreet two-way communication, while maintaining the comfort necessary for extended-wear in moderate noise environments. Audio adapter BDN6676D required.

NMN6258

Medium Weight, Dual-Muff, Over-the-Head Style Headset with In-line PTT. Noise reduction rating = 24dB.

Medium Weight Headset, Over-the-Head, with In-Line PTT, Noise Reduction Rating = 24dB - Intrinsically Safe (FM)

Medium weight headsets offer high-clarity sound, with the additional hearing protection necessary to provide consistent, clear, two-way radio communication in harsh, noisy environments or situations.

RMN4049

Temple Transducer

This headset allows the user to receive audio without covering the ear. It features an In-line PTT and noise-Canceling boom microphone.The Temple Transducer enhances communication and safety by not impairing the user's hearing of the external sound environment, such as machinery and equipment, warning and fire alarms, the intercom, traffic and even casual conversations.

0104026J83

Replacement Cable for Remote Speaker Microphone Replacement Cable for Remote Speaker Microphone (PMMN4045)

PMMN4038

Windporting Remote Speaker Microphone, IP57 Submersible

These Remote Speaker Microphones have a 6-foot coiled cord assembly, swivel clip and quick disconnect latch.The windporting feature dramatically lessens background noise from high winds and other severe weather conditions. IP57 Submersible model tested at 1 meter for 30 minutes.

PMNN4045

Noise Canceling Remote Speaker Microphone- Intrinsically Safe (FM) Noise Canceling Remote Speaker Microphone with 3.5mm earjack at head of microphone with Coiled Cord & Swivel Clothing Clip - Intrinsically Safe (FM)

RMN5072

UHF / 700 / 800 Public Safety Speaker Microphone with 30 inch Straight Cord. UHF / 700 / 800 Public Safety Speaker Microphone with 3.5 mm audio jack, volume switch, and 30"" straight cord (not compatible with VHF & antenna not included) - Intrinsically Safe (FM)

RMN5074

UHF / 700 / 800 Public Safety Speaker Microphone with 18 inch Straight Cord. UHF / 700 / 800 Public Safety Speaker Microphone with 3.5 mm audio jack, included) - Intrinsically Safe (FM)

BDN6676

3.5mm Jack Adapter with Quick Disconnect Latch ‐ for use with 1, 2 & 3‐wire earpiece and lightweight headset accessories ‐ Intrinsically Safe (FM)

NTN8613

Keyload Adapter

0180300E83

Remote Push-to-Talk Body Switch This leaves the user's face unobstructed from an external microphone hence making it more suitable for personnel wearing breathing apparatus, helmet and other protective masks. This ear microphone system is also equipped with an external VOX circuit for total hands-free operation eliminating the need to use the PTT button. All you have to do is speak and your message will be transmitted clearly to the receiving party.

BDN6671

Ear Microphone Interface Module with Selectable Switch for PTT or VOX Operation ‐ Intrinsically Safe (FM)

BDN6678

Ear Mic Std, Beige. For standard noise levels p to 95dB).

This compact, lightweight unit picks up sound through bone vibrations in the ear canal. The miniature earpiece leaves the hands-free and face unobscured, good for rescue and emergency personnel that must retain the ability to help, hear and speak directly to others... those not on the communication system. EMS may be worn with protective masks without reduction in clarity of sound. It's ideal for high-noise environments.

Interface Module is required and sold separately.

PMLN5464

Bone Conduction Ear Microphone System